China Robot Manufacturer & Global Supplier

Home / All / Injection Molding Robot

China Injection Molding Robot Manufacturer & Supplier

Injection Molding Robots for Reliable Part Take-Out

Servo take-out robots, custom EOAT and complete injection molding automation for horizontal molding machines from 30T to 4000T.

RBTC supplies swing-arm, three-axis, four-axis and five-axis servo manipulators that automate plastic part removal, sprue handling and downstream transfer. Each configuration is matched to your machine tonnage, mold clearance and cycle requirement before a quotation is issued.

Row of servo take-out robots installed on horizontal injection molding machines in a production workshop
Servo take-out robots installed on horizontal injection molding machines in production
10+Years of robotics experience
12,000 m²Factory & assembly area
40+Countries supplied
12 monthsStandard robot warranty

Explore Our Injection Molding Robot Range

Different molding machines and different handling needs call for different robot configurations. Compare the four families below, then open the model page for specifications, drawings and quotation details.

BRTP swing-arm servo manipulator for small injection molding machines
30T – 250T

Swing-Arm Servo Manipulators

Compact automation for small and mid-size molding machines where floor space and investment budget are the main considerations.

  • BRTP06ISS0PC for 30T – 150T machines
  • BRTP08WSS0PC for 150T – 250T machines
  • 2 kg loading capacity, servo-driven movement
View swing-arm injection molding robots
BRTNG three-axis servo injection molding robot for automatic part removal
160T – 480T

Three-Axis Servo Robots

Programmable part removal and transfer along three primary axes for repetitive take-out sequences.

  • BRTNG09WSS3P/F for 160T – 380T machines
  • BRTNG11WSS3P/F and BRTNN11WSS3P/F for 250T – 480T
  • Ready for customized grippers and pick-and-place
View three-axis injection molding robots
BRTNN four-axis servo injection molding robot for part positioning and transfer
470T – 800T

Four-Axis Servo Robots

Additional controlled motion for parts that need a defined orientation during removal and transfer.

  • BRTNN15WSS4P/F for 470T – 800T machines
  • 15 kg loading capacity
  • Supports application-specific EOAT layouts
View four-axis injection molding robots
BRTN five-axis servo injection molding robot for large tonnage part and sprue removal
160T – 4000T

Five-Axis Servo Robots

Flexible motion for larger molded parts, complex handling paths and combined product and sprue removal.

  • BRTR09 / BRTR13 / BRTR17 series from 160T to 1200T
  • BRTN17 / BRTN24 / BRTN30 series up to 4000T
  • 8 kg to 60 kg loading capacity across the range
View five-axis injection molding robots

Injection Molding Robot Models: 14 Configurations from 30T to 4000T

The table below lists the models currently available for this product group. Tonnage and loading figures follow the published model specifications, so confirm the latest technical drawing with our engineering team before ordering.

ModelConfigurationRecommended I.M.M.LoadingTypical Use
BRTP06ISS0PCSwing arm30T – 150T2 kgSmall part take-out
BRTP08WSS0PCSwing arm150T – 250T2 kgBasic automatic removal
BRTNG09WSS3P/F3-axis160T – 380T2 kgRepetitive take-out
BRTNG11WSS3P/F3-axis250T – 480T2 kgPart removal and transfer
BRTNN11WSS3P/F3-axis250T – 480T10 kgMulti-cavity take-out and runner cutting
BRTNN15WSS4P/F4-axis470T – 800T15 kgOriented part positioning
BRTNN15WSS5P/F5-axis470T – 800T15 kgProduct and sprue removal
BRTR09WDS5P0/F05-axis160T – 320T8 kgCompact flexible handling
BRTR13WDS5PC/FC5-axis360T – 700T10 kgGeneral take-out automation
BRTR17WDS5PC/FC5-axis750T – 1200T15 kgMedium-tonnage handling
BRTN17WSS5PC/FC5-axis600T – 1700T20 kgLarger part and sprue take-out
BRTN24WSS5PC/FC5-axis1300T – 2100T40 kgHeavy part handling
BRTN30WSS5PC/FC5-axis2200T – 4000T60 kgLarge-tonnage production
BRTN30WSS5PF/FF5-axis2200T – 4000T60 kgLarge-tonnage production

Not sure which model fits your machine? Send the machine brand, tonnage, mold clearance and part weight, and our team will shortlist suitable injection molding robots. Get injection molding robot selection assistance

Injection Molding Robot Features for Consistent Production

Practical robot features that support cycle stability, part quality and easier integration with the equipment already on your floor.

Motion Control

Repeatable Servo-Controlled Movement

Programmable servo movement follows a defined handling sequence with consistent positioning, which supports repetitive part removal and reduces variation caused by manual handling.

Configuration

Four Robot Configurations in One Range

Swing-arm, three-axis, four-axis and five-axis models cover small machines, standard take-out work and complex large-part handling within the same product family.

Tooling

Adaptable Gripping and End-of-Arm Tooling

Different plastic parts need different gripping methods. RBTC supports suction systems, mechanical grippers, air nippers and custom EOAT matched to your part geometry.

Integration

Connection with Existing Equipment

Appropriate configurations can be connected with injection molding machines, conveyors and auxiliary equipment after the necessary technical compatibility and safety checks.

Labour

Reduced Dependence on Manual Handling

Automated take-out removes repetitive part-handling tasks from operators, so production teams can focus on process monitoring, quality checks and line supervision.

Verification

Compatibility Checked Before Quotation

Robot suitability depends on model, mold clearance, total handling weight, stroke requirement and machine interface. We review these points before recommending equipment.

Injection Molding Robot Applications in Plastic Molding

An injection molding robot can do more than remove a finished part from the mold. With suitable tooling and integration, robotic handling supports several stages of the molding and downstream process.

Injection molding robots installed on horizontal molding machines in a workshop, with close-up views of the servo traverse beam and part unloading
Installation views: robots in production, servo traverse beam detail and part unloading
01

Automatic Plastic Part Removal

Remove molded components from the machine and transfer them to a designated collection area. Suited to repetitive take-out, consistent part handling and line upgrades.

02

Product and Sprue Removal

Remove molded products and sprues according to mold structure and operating sequence, using suitable configurations and grippers.

03

Insert Loading and Removal

Support placement of inserts before molding and removal of the finished part, for insert molding processes that need controlled positioning.

04

Part Transfer and Runner Cutting

Coordinate take-out with cutting stations, conveyors or auxiliary equipment for multi-cavity molding and downstream processing steps.

05

Large Plastic Part Handling

Select suitable payload, reach and working stroke for the removal and positioning of larger molded components on high-tonnage machines.

Have a part or process that is not listed here? Discuss your injection molding application with our engineers

14 results
ViewShowcase

How to Choose the Right Injection Molding Robot for Your Machine

Choosing a robot involves more than checking machine tonnage. The factors below are the points our engineering team reviews before recommending an injection molding robot configuration.

Selection FactorWhat to Consider
Machine specificationsMachine brand, model and clamping tonnage
Part and tooling weightTotal weight of the molded part plus end-of-arm tooling
Working strokeRequired vertical, traverse and crosswise movement
Mold clearanceAvailable space for safe robot entry and withdrawal
Cycle requirementsRequired take-out time and overall production cycle
Part geometrySize, shape, gripping points and surface requirements
Machine interfaceElectrical and communication compatibility with the molding machine
Downstream handlingConveyor, cutting, stacking or additional processing requirements

Not Sure Which Robot Fits Your Machine?

Share your injection molding machine specifications, molded part information and target handling process. Our team can help evaluate suitable injection molding robot options before you commit to a purchase.

Get Robot Selection Assistance

Injection Molding Robot Challenges We Help You Solve

Most purchasing problems in injection molding automation come down to fit, tooling, coordination, supplier management and after-sales support. Here is how we address each one.

Challenge 01

The Robot Does Not Fit Your Machine or Mold

An unsuitable stroke, payload or installation configuration creates handling limits and integration problems after delivery.

How RBTC helps: we review machine specifications, mold clearance, workpiece dimensions, total handling weight and production requirements before recommending equipment.

Challenge 02

Standard Grippers Cannot Handle Your Parts

Irregular shapes, special gripping points and delicate surfaces often need more than standard robotic tooling.

How RBTC helps: our engineering team supports customized EOAT, specialized grippers and non-standard fixtures built around your workpieces and handling sequence.

Challenge 03

Robot and Equipment Are Not Coordinated

Robot take-out, mold opening, conveyors and downstream equipment must work within one coordinated production sequence.

How RBTC helps: we support robot programming, application assessment, interface planning and system integration for project-specific coordination requirements.

Challenge 04

Multiple Suppliers Make Projects Hard to Manage

Sourcing robots, tooling and auxiliary equipment separately adds communication and technical coordination work.

How RBTC helps: robot equipment supply, custom tooling and related automation engineering are coordinated within one agreed technical and commercial scope.

Challenge 05

After-Sales Support Is a Purchasing Concern

Industrial buyers need technical documentation, help with equipment setup and support when operating issues arise — especially on cross-border orders.

How RBTC helps: we provide technical documentation, remote assistance, programming guidance and troubleshooting support. Installation, commissioning and operator training can be discussed for applicable projects.

Next Step

Send Us Your Production Requirement

Machine tonnage, part drawing, required cycle time and handling process are usually enough for us to propose a workable injection molding robot configuration.

Describe your project to our engineers

Custom Injection Molding Robot Automation Solutions

Standard robot equipment cannot cover every application. Some lines need customized gripping, special part positioning, extra processing stations or integration with equipment already installed.

Custom End-of-Arm Tooling (EOAT)

The end-of-arm tooling determines how a robot grips, holds and transfers molded parts. We design and configure EOAT around workpiece geometry, weight, gripping points and required movement.

  • Vacuum suction grippers
  • Mechanical gripping systems
  • Air nippers and sprue-cutting tooling
  • Custom end effectors and non-standard fixtures
Explore EOAT and end-of-arm tooling

Non-Standard Auxiliary Equipment

For applications that need additional handling or processing, we support the development of non-standard auxiliary equipment and customized fixtures, including part receiving equipment, transfer arrangements and positioning fixtures.

These components are prepared together with the robot, so the whole handling sequence is planned as one system rather than separate purchases.

See application solution capabilities

Robot Programming and System Integration

A complete solution requires coordinated operation between the robot, the injection molding machine and supporting equipment. We support application-specific programming, compatibility assessment, layout planning and integration.

Review our automation engineering scope

Installation, Commissioning and Operator Support

Technical assistance covers equipment installation, commissioning, operating parameters and troubleshooting. On-site service and operator training can be arranged according to project requirements and agreed service conditions.

View air nipper and sprue-cutting tools

Injection Molding Robot Supply for B2B Buyers

Injection molding factories, equipment distributors, OEM customers and automation integrators buy injection molding robots for different reasons. Support is structured around the purchasing model you actually use.

Plastic Molding Manufacturers

Upgrade existing machines or equip new molding lines with automated part removal. We assist with robot selection, compatibility assessment, tooling requirements and equipment configuration.

Robot Distributors and Wholesale Buyers

Source injection molding robots for resale or coordinated multi-unit purchasing. We clarify models, quantities, specifications, shipping destinations and commercial terms.

OEM Customers and Machine Builders

Explore robot supply and equipment integration options for machine packages and industrial automation projects, with the technical scope reviewed before cooperation.

Automation System Integrators

Source servo take-out robots and discuss customized tooling, programming and engineering support for integration into larger automation systems.

Need Multiple Robots or a Custom Supply Proposal?

Send the required models, estimated quantities, target market and technical specifications. We will respond with a quotation structure and delivery arrangement.

Request a Bulk Order Quotation

Injection Molding Robot Project Workflow: From Requirement to Delivery

A structured process keeps robot purchasing and automation projects predictable, from the first requirement review to equipment delivery and technical support.

01

Requirements Review

Share machine specifications, molded part drawings, handling process, target cycle time and purchasing requirements.

02

Robot Selection and Application Evaluation

Our engineering team evaluates working conditions and recommends suitable robot configurations and tooling options.

03

Solution Design and Quotation

For customized projects, EOAT, non-standard equipment, programming and integration requirements are discussed before the proposal is confirmed.

04

Equipment Preparation and Inspection

Robot configuration, custom tooling preparation, applicable inspection procedures and equipment testing follow the agreed project scope.

05

Delivery and Technical Support

Shipment arrangements, technical documentation and after-sales support, with project-specific commissioning or training assistance where required.

Injection Molding Robot Cases: Real Production Results

These projects show how robot equipment, customized tooling and engineering support come together on real injection molding production lines.

Automation upgrade project for a European injection molding factory using industrial robots
Case 01 · Europe

Injection Molding Automation Upgrade

A European plastic parts manufacturer needed to address high labor costs, inconsistent manual handling and production efficiency limits across multiple handling steps.

RBTC provided integrated automation combining robots, customized auxiliary equipment and coordinated operation with molding machines and conveyors, including on-site installation, commissioning and operator training.

  • 40% increase in production capacity
  • 25% reduction in production cycle time
  • 98% product pass rate
Read the European automation case
Injection molding robot insert loading and part removal project with customized EOAT
Case 02 · Southeast Asia

Automated Insert Loading and Part Removal

A Southeast Asian plastic products manufacturer wanted to reduce manual handling while improving insert positioning and part-removal consistency.

We reviewed the line layout and molding process, selected a suitable injection molding robot and developed application-specific tooling, then adjusted the robot and EOAT during on-site commissioning.

  • More consistent insert placement and part handling
  • Less dependence on repetitive manual operations
  • Application-specific support during implementation
Read the insert loading and removal case

Project results are reported for these specific applications and depend on their operating conditions. Browse more robot application cases

Why Choose RBTC as Your Injection Molding Robot Supplier

Robot equipment supply backed by manufacturing resources, application engineering and international delivery experience.

RBTC factory assembly workshop where industrial and injection molding robots are configured

Manufacturing and Assembly Resources in Dongguan, China

A 12,000 m² factory and assembly area supports robot configuration, equipment preparation, custom tooling and automation projects — so equipment and application engineering come from one supplier.

10+ Years of Robotics Experience

Application planning across multiple manufacturing processes, including injection molding and material handling.

Robot Supply Plus Custom Engineering

EOAT, non-standard auxiliary equipment, robot programming and system integration available alongside standard robots.

International Supply Experience

Robotic equipment supplied to customers in more than 40 countries and regions, including OEM and distribution buyers.

Technical Support After Purchase

Standard 12-month robot warranty, operating documentation, remote troubleshooting and parameter guidance.

Learn more about the company and manufacturing capability behind these injection molding robots: About RBTC and one-stop service capability.

Injection Molding Robot FAQ

Common questions from buyers comparing injection molding robots for plastic part take-out and downstream handling.

What is an injection molding robot?

An injection molding robot is automated handling equipment used with an injection molding machine to remove molded products, transfer parts or perform related handling tasks. Depending on configuration and tooling, it may also support sprue handling or integration with other equipment.

How do I choose the right robot for my injection molding machine?

Selection should consider machine tonnage, mold clearance, molded part dimensions, total handling weight, required stroke, target cycle time and machine interface. RBTC reviews these specifications and recommends suitable options.

What is the difference between three-axis and five-axis injection molding robots?

A three-axis servo robot provides controlled movement along three primary axes and suits many standard part-removal applications. A five-axis servo robot offers additional motion flexibility for complex handling or positioning requirements. The better choice depends on the specific mold and production process.

Can RBTC customize end-of-arm tooling for our molded products?

Yes. RBTC supports custom EOAT, grippers and fixtures based on workpiece dimensions, weight, gripping points and required handling process. Additional auxiliary equipment can also be evaluated for specialized applications.

Can an injection molding robot be installed on an existing machine?

Installation may be possible when the robot configuration, mounting arrangement, machine interface and operating requirements are compatible. RBTC can review your existing equipment to assess technical feasibility and any additional integration needs.

Can RBTC supply injection molding robots in bulk?

Yes. RBTC supports single-unit purchasing, multi-unit orders and coordinated equipment supply for manufacturers, distributors, OEM customers and system integrators. Contact our team to discuss quantities, model requirements and delivery arrangements.

How much does an injection molding robot cost?

Cost depends on robot type, number of axes, payload, working stroke, tooling and any additional customization or integration services. Provide your machine specifications and project requirements so RBTC can prepare a suitable quotation.

What technical support and warranty does RBTC provide?

RBTC offers a standard 12-month robot warranty subject to applicable terms, along with technical documentation and remote assistance. Installation guidance, commissioning support and training may also be arranged for applicable projects.

Request a Quote for Injection Molding Robots & Custom Automation

Need the right robot for your machine, mold and production requirement? Whether you are buying a standard take-out robot, sourcing multiple units or planning a custom injection molding automation system, we can help evaluate suitable equipment and engineering options.

Tell Us About Your Project

  • Company name and country
  • Injection molding machine brand, model and tonnage
  • Molded part dimensions and weight
  • Required handling process and target cycle time
  • Preferred model, if already known
  • Estimated order quantity
  • Custom EOAT or integration requirements
  • Available drawings, photos or production videos

Our team reviews your information and comes back with a suitable robot configuration, technical scope and quotation.

Request an Injection Molding Robot Quote Review All Injection Molding Robot Models

RBTC — injection molding robots, custom tooling and automation engineering from China.

Contact Person
Tommy
Full Name:
Tommy
Tel:

+86 13826981851

Email:
Tommy@iroboticplus.com
WhatsApp:
8615322835803
Address:
Room 102, No. 30, Hengfeng 2nd Road, Daguo, Changping Town, Dongguan City, Guangdong Province